Geissele SSA-E 3.5 lbs 2-Stage AR15 / AR10 Combat Trigger

SKU: 05-160

Click Here for Price
Out of Stock
Orders will Ship within 1 Business Day

The Geissele Super Semi-Automatic (SSA-E®) trigger is a precision-tuned version of the legendary SSA trigger with lighter trigger pull for long-range accuracy.

It features a reduced trigger pull when compared to the SSA (3.5lb vs. 4.5lb). The 1st and 2nd stage pull weights result in a trigger with a smooth, light 1st stage take-up and a crisp, candy cane-like 2nd stage break.

To put it simply – this is the best trigger out there when marksmen-level accuracy is critical, and reliability is a must.

 

About the SSA-E

  • The Geissele SSA-E has a pull weight of about 3.5 lbs. There is 2.3 lbs. on the 1st stage and 1.2 lbs. on the 2nd stage. The pull weights and sear engagement are non adjustable by the shooter.
  • Trigger and hammer are made from quality tool steel.
  • Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
  • The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
  • The Geissele SSA-E trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
  • A full force hammer spring is used for quick locktime and positive ignition of all types of ammo. There is no lightened hammer spring used.
  • The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases locktime over a standard hammer from 8.5 to 5.1 ms and increases accuracy of the weapon.

 

Easy to install – the SSA-E is a simple design that is very similar to the original M16 trigger.

  • The number of parts is identical.
  • There are no adjustment screws to come loose.
  • All springs are captive; they will not get lost during disassembly in the field
  • The entire trigger can be dissembled for cleaning (no rivets or staked parts)
  • The trigger can be installed without removing the safety
  • Sear engagement is pre-set from the factory.
  • Hammer and trigger pins are a close slip fit into nominal receiver holes so the trigger can be installed and removed withrudimentary tools.
  • Triggers come with a slave pin for the trigger/disconnector assembly for easy installation.

 

Patented design ensures accuracy and reliability

  • The Geissele SSA is a 2 stage trigger where there is generous overlap of the sear surfaces which contributes to safety and a low tendency of any inadvertent movement of the trigger to discharge the weapon.
  • The Geissele SSA has a patented pseudo sear that is almost identical to the standard AR15 single stage sear. However, this secondary sear has surfaces that never touch during normal operation.
  • This sear prevents the hammer from falling unless the trigger is pulled. The secondary safety sear contributes to shooter confidence in dynamic/vehicle situations where a fellow shooter’s muzzle may cover position the weapon can never discharge unless the trigger is pulled.
  • Trigger timing is robust and parts have been sized to operate with a certain amount of wear to the working surfaces. The trigger is designed to operate in dusty, abrasive environments that cause wear.

 

Specifications:

  • Size: Standard Mil-Spec Pin
  • Trigger Bow Type: M4 Curved
  • Weapon Platform: AR15/AR10
  • Does not fit HK416 weapons with firing pin safety.



Have Questions About this Product?


The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Geissele Limited Lifetime Warranty

  • Geissele Automatics warrants its firearms, components, and tools against defects in materials and workmanship during the lifetime of the product.
  • Geissele Automatics does not warrant against normal wear and tear, items consumed or expended by their normal use (including springs, pins, etc.), product misuse (including criminal misuse, negligence or use under the influence of drugs or alcohol), accidental damage, or damage caused by improper handling, unapproved modifications to the product, defective or improper ammunition, or corrosion.
  • Defective accessories (e.g., scopes, suppressors, flash hiders, sights, slings, parts with glass or electronic components, etc.) may be warranted by their original manufacturers but are not covered by this warranty.

If you submit a valid claim under this Limited Lifetime Warranty, Geissele Automatics will authorize your return of the product and, at its sole discretion, will:

  1. Repair the product, including replacement of defective parts with new or refurbished parts
  2. Replace the product with a product of equal or greater value.

If Geissele Automatics decides to replace a product under this warranty, Geissele will keep the product being replaced.

You must satisfy all terms and restrictions set forth in this Limited Lifetime Warranty and obtain a Return Material Authorization before shipping any product to Geissele Automatics.

Before shipping any product to Geissele Automatics, please ensure the following:

  1. The product has not been modified, is clean and any accessories have been removed (unless otherwise instructed by a Geissele Automatics technical support agent)
  2. There is no ammunition in any product or packaging
  3. The completed Return Material Authorization form has been placed inside the packaging
  4. The Return Material Authorization number has been clearly written on the outside of the packaging.

Any failure to follow these instructions could result in your package being refused and returned to you without repairs at your expense.

To obtain service, contact Geissele Automatics at sales@geissele.com or 610-272-2060.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Customer Reviews

Based on 20 reviews
95%
(19)
5%
(1)
0%
(0)
0%
(0)
0%
(0)
G
Guy K.
Geissele SSA-E

Love this trigger! Really smooth, easy pull, clean break, nice reset. Perfect.

T
Tim Milligan
Exceptional Trigger

Will only run these in all my guns!

Thanks for sharing your feedback! We're glad you're satisfied with your purchase.

J
Jacob
Excellent

Came exactly as described. Performed wonderfully, couldn’t be any happier. Definitely worth the money.

Thanks for sharing your feedback, Jacob. We're glad you're satisfied with your purchase. Cheers!

T
Tim Collins
Best Trigger

Great price easy to install and man what a great feeling. Purchase one you will be very happy

We are glad to hear that your trigger purchase is working well for you.

B
Brent
Great Trigger!

I purchased this trigger when the cheap drop-in trigger did a 3-round-burst out on the range. Yeah, I had the weapon unloaded and heading back into the case when the range officer walked up to me.
I haven't taken the trigger to the range yet, but it's passed all of it's function checks, is nice, smooth, and crisp. If I don't come back to edit this posting, assume this trigger is wonderful.
The trigger is priced well. I've never shot any of the $300+ triggers, but outside of being adjustable I can't imagine what else they might do better than this one.
The trigger shipped the next business day, and arrived in an acceptable time frame. Great work AT3!