We Ship Fast!

Order by 1PM CST for Same Day Shipping (Mon-Fri)

DPMS .308 A2 Fixed Buttstock Assembly w/ Stock, Buffer, Tube, Spring, & Hardware

Out Of Stock - Join the waitlist to be emailed when this product becomes available

90 Day No-Hassle Returns We Pay Return Shipping

We have a 90-day no-hassle return policy. We pay return shipping.

If you need to request a return, contact us at support@at3tactical.com and we will send you a return label

After 90 days, defective items will still be covered under the manufacturer’s warranty, where applicable.

Please refer to the product listing for warranty details. If you have specific warranty questions, contact us at support@at3tactical.com. We may direct you to pursue your warranty claim directly with the manufacturer.

Your satisfaction is our #1 priority

If you’re dissatisfied with your purchase, in any way, please contact us at support@at3tactical.com – we will do our best to make it right.

Fast & Free Shipping On orders over $50

You will receive fast, free shipping for all orders over $50

Shipping cost is $7.99 for orders under $50. We ship with UPS or USPS, depending on the item.

Most orders received by 1pm CST ship the same day

You will receive an email with tracking information at the time of shipment. To expedite shipping, we may ship your order from multiple warehouses. Orders placed on weekends, holidays, or after 1pm will ship the following business day.

This classic style A2 fixed buttstock originally developed for the U.S. military’s M16A2 rifle has a lightweight, rigid foam plastic core, and an outer shell of fiberglass-reinforced molded polymer.

Buttplate has diamond texture and trapdoor for easy access to internal storage compartment. Includes receiver extension tube, spacer, recoil buffer, buffer spring, and sling loop. For use on .308 rifles.

Have Questions About this Product?

You have not viewed any product yet!

Customer Reviews

Based on 1 review
Some adjustment required.

The quality of the product was outstanding. It was delivered in a timely manner. The only issue I had was that when all assembled the A2 butt stock would not sit tight in position. Even with the screw all tightened down. To remedy this I put a small washer into the beveled hole and put the screw down through it. It snugged up nicely. You can't even tell it's there.

Thank you for the review, Scott. We're glad you liked the product. We'll take a closer look on that Stock issue. For the time being if you have questions, please let us know. - AB