Need your order by Christmas? Click Here

Adjustable AR15/AR10 Gas Block by Wojtek Weaponry – 4 Sizes Available

Out of Stock
Orders will Ship within 1 Business Day
Backed by the Wojtek Weaponry Warranty!
TOP ADD-ON'S
AT3 Tactical Crush Washer - 1/2 Inch for 5.56/.223

AT3 1/2 Inch Crush Washer for .223/5.56 Muzzle Devices

$1.99
AT3™ AR-15 Gas Tube Roll Pins

AT3™ AR-15 Gas Tube Roll Pins – 2pcs

$0.99

Finally, an affordable adjustable gas block in 4 sizes: .625″, .750″, .875″, and .936″.

We have a fit for every barrel!

AT3 is proud to carry adjustable gas blocks from Wojtek Weaponry, giving you an affordable upgrade to your rifle’s gas system. These gas blocks are fully adjustable, regulating the flow of your rifle’s gas impingement for improved reliability and longevity. Whether you’re adjusting a new AR pistol to prevent over-gassing, or custom tuning a precision rifle’s action, these gas blocks will make all the difference in your new build.

These gas blocks also clamp onto the barrel, improving barrel harmonics and accuracy over gas blocks that use pressure directly on the barrel with pins or set screws. It is recommended to use a removable thread locker – such as Blue Loctite – on the set screws that tighten the block around the barrel. Do not use thread locker on the adjustment or locking screws.

Features:

  • 4 sizes available: .625″, .750″, .825″, and .936 (.750″ is the most common size, but always measure the barrel if you aren’t sure!)
  • Low profile design, perfect for any free-float handguard
  • Steel construction (better than aluminum for withstanding extreme temperatures)
  • Secured using 3 set screws to clamp the gas block onto the barrel, increasing accuracy over pinned or set screw gas blocks
  • Gas tube roll pin included
  • Compatible with AR15 and AR10 platforms
  • Allen wrenches for attachment, adjustment, and locking set screws are optional but highly recommended.

Sizes as follows:

  • Adjustment screw = 5/64″
  • Side locking screw = .05″
  • Attachment screws= 3/32″

Specifications:

  • Material: 1018 Steel, Black Nitride
  • Length: 1″
  • Height: Sits 3/8″ off of the barrel (fits under all free float handguards!)
  • Weight: 1.3-1.8oz depending on size
  • Packaging: PE Bag

Frequently asked questions:

Q: How can I tell what size of gas block I need?

A: The gas block size is based on the outside diameter of your barrel. The most common size is .75″ (this is the military standard). If you aren’t sure – use calipers to measure the diameter of the barrel, in the area where the gas block sits. Or alternatively, you can try looking up the make and model of your rifle online for more details.

Q: How do I know if this gas block will fit under my handguard?

A: These adjustable gas blocks are as small as you will find on the market. They are guaranteed to work with our AT3 handguards, and they should be compatible with all the other handguards out there!

Products available on this page:

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Wojtek Weaponry Warranty

  • We will gladly accept the return of products that are defective due to defects in manufacturing and/or workmanship.
  • Fulfillment mistakes that may be made which result in the shipment of incorrect products to you will also be accepted for return.

Contact Details:

Please send an email at returns@wojtekweaponry.com

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Customer Reviews

Based on 55 reviews
84%
(46)
5%
(3)
2%
(1)
4%
(2)
5%
(3)
M
Michael Jones
Seems like it's going to work great

The block itself was easy enough to position thanks to the witness hole at the top and a very small drill bit. It seems like the 3 compression screws will Keep it very well secured to the barrel without using stupid thread locking compounds. Unfortunately for me the set screw for the adjustment screw is partially blocked by my hand guard so I will have to remove the free float hand guard every time I want to adjust it it seems. A minor inconvenience though and I look forward to heading to the range soon to see how it works. I purchased it because I planned on shooting both suppressed and unsuppressed on a 10.5" barrel.

Thanks for sharing your feedback! We're glad you're satisfied with your purchase.

E
Enkidu556
Great Block, Great Price. For Sure Going In My Future Builds As Well

I've wanted to have the option of tuning my gas system in a build, so this time around I bought this .750 Adjustable Wojek gas block because the price was too irresistible when compared to many others out there. I really liked that this is a 3-screw clamp-on style installation. This block is not going anywhere. The finish is very nice and very clean.
Yesterday I finally got the chance to get out to dial it in on my new 7.5" pistol build in 5.56. Following the instructions, I closed the screw all the way and then backed it off 1/4 turn and it cycled perfectly for a while. After I was all sighted in I then played around at various distances on paper. During this time is when heat seemed to change my gas tuning needs. I was getting short strokes and failure to feed issues. After I backed off the screw another 1/2 turn everything ran great for the next 150+ rounds of PMC Bronze .223 and American Eagle .223.

Thanks for sharing your feedback! We're glad you're satisfied with your purchase.

H
Haas
Didn't fit

I bought the .936 one for my .50 beowulf ar pistol, which is definitely an uncommon build, so it did NOT fit the handguard. The handguard has a 1.295 ID. This was my first build, so it could definitely be my fault, however this is the only gas block that was claimed to fit ANY handguard that could work for my build. We had to do major trimming on the top and bottom of the block. In all, we got it to work. Works well so far.

So sorry to hear it didn't fit your handguard. If you continue to encounter issues, please don't hesitate to reach out. We're always here to help.

L
Larry Wade
AR 15 BUILD

Wojtek adj. gas block worked great! Great design, having line up "view hole" to aid positioning the block correctly on "no shoulder barrel." I will truly consider this gas block, when choosing one in the future on my next build. I have acheived better accuracy with clamp style gas blocks.

A
Andrew Hardas
Excellent quality and fitment.

Excellent product, fast shipping, couldn't have asked for more. Thank you!

Frequently purchased together

AT3™ Mil-Spec AR-15 Buffer Retainer

AT3™ Mil-Spec AR-15 Buffer Retainer

$1.99
AT3 Tactical Mil-Spec AR-15 Buffer Retainer If you’re looking for a reliable buffer retainer

AT3™ FU-BAG™ AR-15 Lost Parts Kit - Springs, Detents, Replacement...

$7.99
Made an “Oops” with your New Build?  You Detent-Launchin’, Spring-Losin’ Fool, you. We’ve all
Kinetic Development Group QD MLOK Offset Surefire Mount

Kinetic Development Group QD MLOK Offset Light Mount

(no reviews yet)
$69.81
Kinetic Development Group QD MLOK Universal Offset Mount Revolutionize how you attach accessories to

Breek Arms Micro Warhammer AR-15 Charging Handle

$44.99
Snag Free Ambidextrous Charging Handle – Breek Micro Warhammer The Breek Arms Warhammer is
Odin Works Adjustable AR-15 Buffer Weight - Heavy - AT3 Tactical

Odin Works Adjustable AR-15 Buffer Weight - Heavy

$46.55
Heavy Steel Buffer for Overgassed or Blowback AR15 In the world of AR15s, you
AT3 Spear M-LOK Handguard with Cerakote Finishes - 7 Colors

AT3™ SPEAR M-LOK Handguard for AR-15 – 9, 12, &...

$99.99
The AT3 SPEAR™ is our best, most secure handguard. Simple to install, lightweight, and

Breek Arms WARHAMMER Mod 2 Ambidextrous AR 15 Charging Handle

$44.99
Ultra-Slick, Ultra-Affordable Ambidextrous AR15 Charging Handle If you’re looking for a charging handle upgrade
AT3 Slick Side Billet Upper Receiver - 7 Colors Available

AT3™ Slick Side Upper | Billet Upper Receiver for AR-15

$89.99$80.99
Tough, Sleek, and ready for the AT3 SPEAR M-LOK Handguard Machined from billet aluminum,
AT3™ AR 15 Gas Tube & Carbine Gas Tube Length

AT3™ AR 15 Gas Tube - Carbine, Mid, Rifle, &...

$13.99
Quality, USA made stainless steel gas tubes with roll pins for AR rifles. Note:
AT3 Tactical Crush Washer - 1/2 Inch for 5.56/.223

AT3™ 1/2 Inch Crush Washer for .223/5.56 Muzzle Devices Compatible...

$1.99
Time Your Muzzle Device with a Black Nitride Crush Washer from AT3 Crush washers
AT3 AR-15 Billet Upper and M-LOK Handguard with Cerakote Finishes - 7 Colors

AT3™ AR 15 Upper Receiver and SPEAR Handguard Combo

$169.99
Getting Started on Your Next Build? Go Sleek and Lightweight with our Billet Upper

Wojtek Weaponry Adjustable Gas Block + Gas Tube + Roll...

$52.49
The Best Value in Adjustable Gas Blocks! This combo includes your choice of 4

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...