Up to 25% Off Optics & Sunglasses | Shop Now

*BLEMISHED* STNGR HWK® M-LOK Free Float AR-15 Handguard

Out of Stock
TOP ADD-ON'S
QD M-Lok Sling Mount

STNGR QD M-LOK Sling Mount

$16.99
AT3™ M-LOK Rail Section - 5 or 7 Slots - Made in USA - 7 Colors Available

AT3™ M-LOK Rail Section – 5 Slot - FDE

$19.99
AT3™ M-LOK Rail Section - 5 or 7 Slots - Made in USA - 7 Colors Available

AT3™ M-LOK Rail Section - 7 Slot - Black

$15.99

*These STNGR HWK M-LOK Handguards are BLEMISHED*

These STNGR HWK M-LOK Handguards are BLEMISHED. Their built-in QD sockets do not work. If a sling was to be used with them a M-LOK QD socket would need to be installed in the desired spot.

 

————————————————————————————–

 

STNGR HWK – THE BEST MOTHER FUNCTIONING HANDGUARD ON THE PLANET.


Based on the number of 5-star reviews alone, you could say no other handguard on the market comes close. Reviews don’t tell the whole story though. It ain’t just about looking pretty — STNGR’s s**t works when you need it the most. That’s why STNGR handguards are trusted by everyone from SWAT teams to competitive shooters. To be fair, your gun will still look pretty.

WHAT’S INCLUDED?

1) HWK Free Float Handguard (15″)

4) (2) 10×32 Allen Bolts

2) 1018 Steel Barrel Nut

5) Allen Key

3) Proprietary Anti-Slide Plate

6) 1 3/16″ Crowfoot Wrench (1/2″ Drive)

FREE INSTALL CHECKLIST

  Download the checklist here

INCREDIBLY SIMPLE INSTALLATION


The HWK, with its simple non-timing barrel nut, was engineered to be the easiest handguard to install on the market.

Perfect for first time builders and seasoned gunsmiths alike. No hassle, no frustration, no previous experience required. Simple.

Check out the installation guide here 

LOCKING ANTI-SLIDE PLATE


The HWK solves a problem that plagues most rails on the market – handguard sliding.

With our proprietary anti-slide plate that interfaces with a groove in the barrel nut, the HWK is locked to the upper – ensuring that it won’t go anywhere.

ANTI-ROTATION TABS


Forward sliding is a problem that’s solved with the anti-slide plate, but what about lateral rotation?

The HWK has built in anti-rotation tabs to prevent any kind of rotation.

By combining the anti-slide plate and anti-rotation tabs, the result is a rock solid fit – no matter how hard you run it.

LIGHTWEIGHT, INCREASED VENTILATION


Aggressive machining cuts throughout the rail serve 3 critical functions:

    1) Significantly slash excess weight

    2) Increase ventilation to cool both your handguard and barrel

    3) Steep angles prevent fingers from sliding into grooves

Specifications

  • Handguard Material: 6061-T6 Aluminum
  • Barrel Nut Material: Steel
  • Handguard Weight
    • 15 Inch: 10.19 Ounces
    • 13.5 Inch: 9.22 Ounces
    • 10 Inch: 7.47 Ounces
    • 7 Inch: 6.03 Ounces
  • Barrel Nut Weight: 3.49 Ounces
  • Inside Diameter (ID): 1.35″
  • ID of Top Gas Tube Channel: 1.70″
  • Compatibility: For use on AR-15 & M4 variants (223, 300blk & 556) *Modification is required to fit with billet uppers.
  • Finish: Either type III hard coat anodized black or Magpul FDE Cerakote

BACKED FOR LIFE

STNGR proudly stand behind their products with the SWARM Lifetime Warranty. If you have any issues happen that aren’t caused by normal use, they’ll send you a replacement – for free. It’s that simple.

Read the full warranty here.

WHAT’S NEEDED FOR INSTALL?


In addition to the included tools, you will need a low profile gas block if you don’t have one already. Most other brands will work and we also carry one here that is guaranteed to work with the HWK.

Lastly, here is a checklist you can use to see what other installation tools you may need. Get the checklist here.

Products available on this page:

Have Questions About this Product?