Reviews

Awesome look and feel, love the design and feels great... Good audible clicks and has a long and short throw lever... Wish the screws were made of stronger metal though, feels like they will strip if you tighten too much and try to disassemble later

Love the angle ,wish it was a little more abrasive/grippy but feels very nice especially with the dove tail

Has some play but very minimal, no QD mount which sucks but made the sling hole loop work

The Warhammer is great product feels very solid but very light at the same time love the gas directing design for suppressed weapons and very easy to pull in both sides. BCG had better staking than my current one , good finish, magnetic particle inspected, super slick, full auto design... Super smooth no complaints

Had a shipping issue which the company remedied immediately without question and shipped me the product I ordered. When it arrived I installed it in no time and it looks and works great!

This stock is great perfect cheek weld for me also
Feels very durable and strong.

Absolutely love this grip!!! Super comfortable and easy to install!!!

The burnt bronze matches the rest of the build perfectly 👌🏽

Beautiful machine work and definitely finished off my build. QD slot on the baseplate is a bonus. Liked it so much I got another red one for my other rifle as well.

The first one I bought for my 350 Legend
build. I liked it so well I bought this one for a 223 wylde build. I mount them far enough out to get a good steady hold. They’re small enough so that I can get my thumb on top of the barrel for my light switch. Sturdy enough, a great bargain.

Just picked this bad boy up, can’t wait to use it! First thoughts, things well built and the customer service is outstanding.

Most definitely want to read the directions and required specs to mount (20 inch pounds)

I sheared off the bolt by over-tightening by hand cause I’m a meat stick but customer service was fast to send me a replacement

All in all, I’m extremely happy with it and would purchase again for sure

Good charging handle. For anyone interested, the Ranger Green matches the Aero Anodized Green pretty much perfectly. Great finish to my build. I did notice slight binding on a few pulls, but I'll admit my angle wasn't great. Just haven't had that happen on other handles. Otherwise quite happy with the purchase. Great value for the money.

Thanks for the quick shipping AT3.

Great optic, nice clear sight picture that absolute co-witnesses with my backup flip up sights. The dot is crisp and easy to find.

Awesome highly recommended nice grip awesome performance

Love the buffer design and how it works with the flat wire spring. I have two NFA registered SBR lowers and multiple different caliber uppers to use with them. Built a 5.5 inch barreled 9mm upper to use with Endomags. The flat wire action spring works with my 5.56, 300 BO and 9mm uppers, both suppressed and unsuppressed. All I have to change in the lower is the buffer. The nifty little plastic tool that comes with this K-Spec buffer and spring makes it easy to swap uppers/calibers at the range. I keep the tool in my pistol grip storage compartment along with the spare 2032 battery for my optic. So much fun swapping between 9mm and 300 BO on my PDW style AR lower. Everything cycles flawlessly.

Not the first thing I've bought from AT3, and won't be the last.

Running in at half the price of the top end optics in the same family, the Alpha+Delta combo set gets you running with money left over for ammo. AT3 is a trustworthy group of dudes in Minnesota, which you get for free.

Don't buy this if you are the type to get all worked up over brand logos and name recognition; but if all you care about is performance and reliability, run with this setup & use the spare cash on ammo.

Smooth clean break with a quick reset. Control your trigger pull precisely to generate tighter groupings for a reasonable price.

Perfect fit and no need to Dremel the inside to have it flush. It is already flush. Love the way the grip feels in my hand with the magwell. 10/10 recommend

Fit was a little tight but after a few rounds through it fits great and no issues. Would buy again

I've been a fan of Magpul ever since they came out with their original mag-pul, and every steel or aluminum magazine I have is equipped. But now I'm tricking out my Magpul Gen M2 & M3 magazines with the Ranger Floorplate. I'm starting with my 7.62 mags and eventually will do all my AR15 mags. These make rapid draws from my plate carrier a real snap!
AT3 is rapidly becoming my go-to source for parts!

I haven't field tested the handguard yet but it's surprisingly light and feels sturdy upon first impression. The tool provided didn't hurt the barrel nut during install(some cheaper 1 use tools will leave dings/scratches) so far so good.👌

Ordered your riser last week and received it very timely. Attachment was quick and easy and the position is ideal. Thank you all!

This thing works great on all the mags I have 30 40 60 polymer metal they all hold tight and they all drop freely when depressed only thing I could say is it's a little stiff if trying to eject a full mag but how many times do you need to release a full as opposed to an empty so definitely worth the money built well to and good finish

One word: “ Amazing “ And I caught it on sale. I already had the red dot from AT3.

I bought this for my Splenda Skunk build. My first experience shooting a gas gun suppressed and I was worried about getting gassed out.
I swapped the PSA has block out for a Superlative Arms and used a Radiant SP charging handle. Using a Thunderbeast Ultra 7 I had zero gas to the face. I probably could swap my Daniel Defense bolt in and see if that gives me more gas to the face. But not worth the ammo. Also shooting subsonic blackout not sure how much gas that'd put off. But either way it's a great BCG.
The dual extractors are super aggressive. With the gas tuned right the cases are banging the brass deflector hard. Leaving a mark.