We Ship Fast!

Order by 1PM CST for Same Day Shipping (Mon-Fri)

AT3™ AR-15 Armorer's Wrench / Multi-Function Tool

AT3™ AR-15 Armorer’s Wrench / Multi-Function Tool

Out Of Stock - Join the waitlist to be emailed when this product becomes available

Lifetime WarrantyOn All AT3 Brand Products

All AT3 Tactical Brand Products carry a lifetime warranty against manufacturer’s defects.

This includes AT3 Red Dot Sights, Handguards, Iron Sights, and any other product that carries the “AT3 Tactical” or “AT3™” name. For other brands (ex. Magpul or Troy), please refer to the manufacturer’s warranty policy.

In the event that your AT3™ product becomes unusable, we will repair or replace the product at no charge to you.

If we cannot repair your product, we will replace it with a product in perfect working order of equal or better physical condition. The warranty is fully transferable, but we may require information about the original purchase to validate the authenticity of the product.

If your product is in need of warranty service, please contact AT3 Tactical to start the process

Our contact info is available here. To expedite processing, please provide your order information and description of the defect.

Please note: The AT3 Lifetime Warranty does not cover loss, theft, intentional damage or cosmetic damage that doesn’t affect the performance of the product.

Fast & Free Shipping On orders over $50

You will receive fast, free shipping for all orders over $50

Shipping cost is $7.99 for orders under $50. We ship with UPS or USPS, depending on the item.

Most orders received by 1pm CST ship the same day

You will receive an email with tracking information at the time of shipment. To expedite shipping, we may ship your order from multiple warehouses. Orders placed on weekends, holidays, or after 1pm will ship the following business day.

This perfect tool for AR builds that allows installation & removal of barrel nuts, muzzle devices, rifle buffer tubes, and castle nuts.

This tool includes:

  • A barrel nut wrench that can handle delta-rings, free float barrel nuts, and 30mm barrel nuts like the AT3 PROLOK handguard
  • 1/2″ torque wrench adaptor
  • Castle and jam nut wrench (for both old and new style castle nuts)
  • A 3/4″ wrench slot for installation of most muzzle devices
  • A cutout for installing/removing rifle-length buffer tubes

Specifications:

  • Material: 4140 Steel
  • Finish: Powdercoat

Have Questions About this Product?


You have not viewed any product yet!

Customer Reviews

Based on 9 reviews
67%
(6)
11%
(1)
22%
(2)
0%
(0)
0%
(0)
R
R.W.
AT3 Armorer’s Wrench

Wrench is overall a good buy and worth the money. Like many multi-function armorers wrenches it will fit some upper components better than others. Mine is a little loose for installing a castle nut - unless you are paying close attention it can slip. Other parts of the wrench work just fine as it should.
AT3, as always, has the best turnaround on shipping and receiving of your merchandise as well as absolutely THE BEST customer support folks around!
Thanks (again) AT3 Team!

T
T.A.
Armorer’s Wrench

Sure makes AR work easier!! Great service and fast shipping!!

w
w.C.
Armorer's Wrench

I tried to use the wrench, the wrench does not fit my standard muzzle device. The wrench does fit the barrel nut but appears to be mis-aligned; when any torque is applies it will really try to dis-engage the barrel nut. In all fairness the barrel nut is on extremely tight well past 60 ft./lbs. and could be galled on the aluminum receiver. I am soaking the nut with aero kroil and hoping for the best.

N
N.S.
Great price for a great product

This is my second one! Great product

T
T.M.
Gets the job done

Not bad. The coating that is put on the tool came with a chip in it and isn’t as smooth and uniform as I would ideally like. That being said the tool seems to function, but if I was going to use it frequently I’d buy something else.