1 more pictures
Full Length Drop-In Handguard for Carbine Length AR-15
This Super Slim drop-in handguard works with a wide variety of the most popular AR-15 rifles in America. This 3-piece M-LOK rail system drops in with no gunsmithing required on the Ruger AR556, Smith & Wesson M&P15 Sport 2, Colt L6920, and more. You don’t have to remove anything but your standard clamshell handguards, and installation is a breeze.
High Quality and Made in USA
This drop-in M-LOK rail system gives your rifle features you typically only see on free-floated rifles. Seven sides of M-LOK slots for accessories, plus a picatinny rail that wraps around your carbine-length front sight base. Plus, this is UTG Pro product – everything here is designed and made in the USA. Expect excellent fit and finish from the scalloped top rail edges to the ergonomic finger grooves.
If you’re not sure what “carbine length” means, or if this rifle will work for you, check out our article on AR-15 gas system lengths. Generally, if the distance from the front face of your upper receiver to the back of your front sight tower is around 7 inches, this handguard will work for you. Free free to contact us so you can verify fitment before you purchase!
Specifications
- Material: 6061-T6 Aluminum
- Weight: 12.5 oz
- Rail Spec: M-LOK®
- Length: 15 inch
- Width: 1.78 inch
- Height: 2.1 inch
Have Questions About this Product?
The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.
If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.
UTG Lifetime Warranty
Leapers, Inc. warrants that all UTG & UTG PRO products conform to published specifications and are free from defects in material and workmanship. We will repair or replace defective products for the duration of the product’s life span. Our dedicated in-house customer service professionals will provide the best-in-class UTG experience.
Please note that this warranty does not extend to products disassembled, damaged from misuse, accidental impact, negligence, natural disasters/accidents, or unauthorized repair or alteration.
Warranty Instructions
- Go to Warranty Request under Customer Service on our website.
- Fill out the necessary contact and product information to the best of your knowledge.
- A purchase receipt is required for all warranty cases and needs to be attached at the end of the form.
- Finalize the case by submitting the information to us.
- You will hear from one of our customer service reps within 24-48 hours and we will provide you with additional information and instructions.
- No return will be accepted without an RA#.
- For any questions regarding the process, please feel free to call at (734)542-1500.
Disclaimer: Manufacturer’s warranty is subject to change without prior notice.
Customer Reviews
Fits very snug around the gasblock of the m&sport II. Nice and tight for the money
Thanks for the review! We're glad to hear that you like the handguard.
The UTG Pro Super Slim 15 Inch M-LOK Drop-In Handguard is an instant update for older polymer grip/A2 front sight guns. It went on seamlessly. While it provides an opening for the front sling ring, I removed the ring and instead opted for the QD connector include with the kit (I mounted it near the rear of the handguard). I also ground off my bayonet lug as if protruded a bit, keeping me from mounting a Magpul hand grip. The biggest bonus is that the full length of the handguard allowed me to mount my WML right at the front so I no longer get a cast shadow from the barrel. The UTG Pro Super Slim is the best upgrade I have done to my AR! Lastly, AT3's staff was awesome answering my pre-sale questions about compatibility and mount styles!!
Thanks for sharing your feedback! We're glad you're satisfied with your purchase.
I’ve always been a huge fan of the front side post on all my rifles. While there are definitely better options out there, you will pay for them. Install on this was super easy. Fitment was spot on. For the money, you cannot beat this rail. Whether it’s a budget build or a high-end build, I think this rail works perfect. This is my 3rd UTG rail.
I bought this as a replacement handguard for an M&P 15 sport II and I have to say, it was well worth the price. It gives it a cleaner look than the Magpul handguard that comes with it, plus the ability to add more rail sections via m lok is awesome. Eventually I will add more accessories to it, and having those open m lok slot will be helpful.
Thanks for sharing your feedback! We're glad you're satisfied with your purchase.
The handguard fit fairly well. Took a little effort to get the pieces to seat properly against the ring nut. Was sad it only came with one attachment piece. So still some work to do. Forward grip is on and need more mounts to fit the light and laser
Thanks for sharing your feedback! We're glad you're satisfied with your purchase.