STNGR VLCN M-LOK Handguards
*BLEMISHED* STNGR VLCN® 10.5" M-LOK Free Float AR-15 Handguard - Non-Functional QD Sockets
from$99.99$155.99Save $56.00
or 4 interest-free payments of $25.00 with 
6 Magazines Per Order: Due to extreme volume, we are limiting sales of magazines to 6 per customer order. This applies to individual and bundled magazines. AT3 reserves the right to cancel any order over the 6 magazine limit.
Product description
*These STNGR VLCN M-LOK Handguards are BLEMISHED*
These STNGR VLCN M-LOK Handguards are BLEMISHED. Their built-in QD sockets do not work. If a sling was to be used with them a M-LOK QD socket would need to be installed in the desired spot.
————————————————————————————–
Based on 5-star reviews alone, no other handguard comes close. But reviews don’t tell the whole story. USA Made with a rugged design, rock solid locking mechanism and incredibly simple installation, there’s a reason why STNGR handguards are regularly trusted by Police, SWAT, competition shooters, shooting instructors, home defenders and tens-of-thousands of STNGR customers.
WHAT’S INCLUDED?
|
1) VLCN Free Float Handguard (15.5″) |
4) (2) 10×32 Allen Bolts |
|
2) 1018 Steel Barrel Nut |
5) Allen Key |
|
3) Proprietary Anti-Slide Plate |
6) 1 3/16″ Crowfoot Wrench (1/2″ Drive) |
FREE INSTALL CHECKLIST
Download the checklist here
INCREDIBLY SIMPLE INSTALLATION
The VLCN, with its simple non-timing barrel nut, was engineered to be the easiest handguard to install on the market.
Perfect for first time builders and seasoned gunsmiths alike. No hassle, no frustration, no previous experience required. Simple.
Check out the installation guide here
LOCKING ANTI-SLIDE PLATE
The VLCN solves a problem that plagues most rails on the market – handguard sliding.
With our proprietary anti-slide plate that interfaces with a groove in the barrel nut, the VLCN is locked to the upper – ensuring that it won’t go anywhere.
ANTI-ROTATION TABS
Forward sliding is a problem that’s solved with the anti-slide plate, but what about lateral rotation?
The VLCN has built in anti-rotation tabs to prevent any kind of rotation.
By combining the anti-slide plate and anti-rotation tabs, the result is a rock solid fit – no matter how hard you run it.
LIGHTWEIGHT, INCREASED VENTILATION
Aggressive machining cuts throughout the rail serve 3 critical functions:
1) Significantly slash excess weight
2) Increase ventilation to cool both your handguard and barrel
3) Steep angles prevent fingers from sliding into grooves
Specifications
- Handguard Material: 6061-T6 Aluminum
- Barrel Nut Material: Steel
- Handguard Weight
- 10.5 Inch: 7.47 Ounces
- Barrel Nut Weight: 3.49 Ounces
- Inside Diameter (ID): 1.35″
- ID of Top Gas Tube Channel: 1.70″
- Compatibility: For use on AR-15 & M4 variants (223, 300blk & 556) *Modification is required to fit with billet uppers.
- Finish: Either type III hard coat anodized black or Magpul FDE Cerakote
BACKED FOR LIFE
STNGR proudly stand behind their products with the SWARM Lifetime Warranty. If you have any issues happen that aren’t caused by normal use, they’ll send you a replacement – for free. It’s that simple.
Read the full warranty here.
WHAT’S NEEDED FOR INSTALL?
In addition to the included tools, you will need a low profile gas block if you don’t have one already. Most other brands will work and we also carry one here that is guaranteed to work with the VLCN.
Lastly, here is a checklist you can use to see what other installation tools you may need. Get the checklist here.
All 3 options on this page
- *BLEMISHED* STNGR VLCN® 10.5" M-LOK Free Float AR-15 Handguard - Non-Functional QD Sockets - Length: 10.5 inch, Color: Black | SKU: 10VLCN-B
- *BLEMISHED* STNGR VLCN® 10.5" M-LOK Free Float AR-15 Handguard - Non-Functional QD Sockets - Length: 10.5 inch, Color: Flat Dark Earth | SKU: 10VLCN-FDE-B
- *BLEMISHED* STNGR VLCN® 10.5" M-LOK Free Float AR-15 Handguard - Non-Functional QD Sockets - Length: 10.5 inch, Color: OD Green | SKU: 10VLCN-ODG-B
Customer reviews 2
Nick Verified buyer
Verified buyerLove these handguards! I picked this up on a great deal. Couldn't find the blemish. I did end up filing the anti rotation tabs off, but that's because either AR-45 upper receivers are a little bit wider there, or the Pro2A upper I have is a little wider there. I built an AR-45 with this. Nothing wrong with the STNGR hand guard. I put one on my 300 blackout, and it fit perfectly and they both look and feel great. I will be looking at purchasing another of these hand guards for my next build.
jonathan.moon Verified buyer
I picked up the blemished STNGR VLCN M-LOK hand guard because it was a great deal. After receiving it I was very pleased, couldn’t really see where the defect was. Looks great!
AT3 Tactical · Thank you for taking the time to leave a review. We are thrilled to hear that you are pleased with your purchase of the *BLEMISHED* STNGR VLCN M-LOK hand guard. We strive to provide great deals and we are glad that you were able to take advantage of one. We apologize for any inconvenience caused by the blemish, but we are happy to hear that it did not affect the overall appearance of the hand guard.
Leave your review
Questions & Answers
No questions yet. Ask about fit, install or compatibility and our team answers within a business day.
Warranty & returns
90-day no-hassle returns
The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.
If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.