Dead Air Key-Mo Mount for SCO SAKER
or 4 interest-free payments of $49.75 with 
6 Magazines Per Order: Due to extreme volume, we are limiting sales of magazines to 6 per customer order. This applies to individual and bundled magazines. AT3 reserves the right to cancel any order over the 6 magazine limit.
- Free standard shipping on orders $139+ details
- 90-day no-hassle returns policy
- Backed by the Dead Air Warranty! what it covers
Product description
Unlock the Potential of Dead Air’s KeyMo Quick Detach System for Your SilencerCo CANS
The KeyMo “S” threaded adapter enables users to take advantage of Dead Air’s ubiquitous KeyMo mounting standard when using legacy SilencerCo SAKER and CHIMERA suppressors.
It directly replaces the factory direct thread mount, allowing the SAKER to swiftly interface with any KeyMo muzzle device. Enabling fast and secure tool-less attachment and removal for greatly enhanced convenience.
Constructed from durable stainless steel with a protective nitride finish applied over Cerakote for proven durability. Provides the perfect lockup every time thanks to patented design.
Step up to the versatility of KeyMo. Ditch direct thread hassles and unlock rapid mounting and switching between hosts with Dead Air’s KeyMo Adapter for Silencer Co use.
Specifications
- Brand: Dead Air Armament
- Model: Key-Mo Mount for Silencer Co Suppressors
- MPN: DA429
- Material: 17-4 Stainless Steel
- Finish: Black Nitride
Customer reviews
No reviews yet. Bought this one? Tell the next builder how it went.
Questions & Answers
No questions yet. Ask about fit, install or compatibility and our team answers within a business day.
Warranty & returns
Backed by the Dead Air Warranty!
Dead Air Armament Warranty
We provide a lifetime warranty against all manufacturing defects and damages caused by the normal use of this product. The manufacturer will repair or replace free of charge any suppressor manufactured by, or at the direction of, Sound Moderation Technologies. The product is sold “as is” with no further implied contractual rights or warranties beyond those expressly stated herein.
The warranty does not apply to certain conditions or acts. It is at the sole discretion and determination of Sound Moderation Technologies if a particular defect or condition is covered by this warranty.
Conditions not covered include, but are not limited to: modifications, abuse, neglect, use of defective ammunition, use of improperly sized ammunition, and criminal conduct.
Sound Moderation Technologies assumes no liability for damages or bodily injury caused by such acts or omissions as previously described. Abuse and neglect are defined as usage outside of the reasonable scope for which the product is intended, thus contributing to the accelerated and unreasonable premature wear of the suppressor itself.
To submit a warranty claim please submit the online form here and have the below ready
• Your Product In-hand
• A photo of your ID
• A copy of your Form 3 or Form 4
Notice:
DO NOT SHIP THE SUPPRESSOR FOR REPAIR WITHOUT FIRST COMPLETING THE FORM AND RECEIVING A CONFIRMED RMA NUMBER. DO NOT SHIP IN ANY EVENT WITHOUT A COPY OF THE APPROVED BATF FORM.
When you ship the suppressor back to the manufacturer, please include a printed copy of the completed RMA form.
If for any reason your suppressor is not eligible for repair or replacement, you may purchase a replacement suppressor for 50% off the MSRP for the same or similar suppressor. Please contact our Customer Service Department for further details and requirements.
Contact Details:
Telephone: (844) 293-6778.
Disclaimer: Manufacturer’s warranty is subject to change without prior notice.
90-day no-hassle returns
The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.
If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.
