20 Adjustment Points For The Most Ideal Gas Setting
The Odin Works .750″ Low Profile Adjustable Gas Block is specifically designed to ensure the proper functionality of the gas system. It features pinpoint adjustability with 20 gas settings that allow the operator to get the most ideal setting for improved performance.
The adjustment requires no set screws. You can simply adjust the stainless screw where you want it, and it’s all set. This adjustable gas block from Odin Works is beneficial to reduce recoil, reduce wear on other parts, and will allow you to fine-tune your rifle for specific ammunition loads.
Made From Black Nitrided Carbon Steel
The Odin Works .750″ Low Profile Adjustable Gas Block is machined from Carbon steel, and finished with Black Nitride for long-lasting durability. Its front-facing stainless steel adjustment screw and spring can handle high temperatures, and work flawlessly with suppressed and unsuppressed configurations.
This allows you to run just the right amount of gas to cycle your rifle perfectly, while having minimal recoil (increasing accuracy), and greater efficiency. It helps to reduce wear on your rifle, and allows many customizations such as running different bolt carrier groups, different buffer weights, adding a suppressor, or running different ammunition.
The ODIN Works adjustable gas block will fit any barrel with .750″ diameter and works with any caliber.
NOTE: Not for use with pistol-length gas systems and high-pressure rounds.
How To Disassemble for Periodic Cleaning:
- Loosen the set screw furthest from the muzzle, below the gas tube roll pin.
- Loosen and remove the set screw on the side of the gas block.
- Carefully remove the spring and detent ball.
- Remove the large gas adjustment screw, closest to the muzzle.
- Soak in cleaning solvent.
Features:
- Low profile design allows this adjustable gas block to fit inside most rail systems and handguards
- 20 adjustment settings
- Gas can be completely shut off
- Inconel adjustment screw and spring
- Includes detent ball, cross pin, set screws, and hex wrenches.
- Made in the U.S.A.
Specifications:
- Material: Carbon Steel
- Finish: Black Nitride
- Length: 1″
- Height: 1.41″
- Width: 0.95″
- Weight: 2.15 oz.
