Only 2 remaining. Order now!
AR-10 Nitrous Compensator for Competition Shooting
The .308 Nitrous Compensator keeps your AR-10’s muzzle flat with aggressive side ports and tunable top jets. This design came from the competitive world, where fast, accurate follow-up shots are an absolute must. And the compensation can be adjusted to your loading of choice with the tunable jets. Includes a crush washer, allen wrench, and adjustable tuning jets for the top ports.
Tuning Procedure from Lancer
The objective when tuning your Nitrous is to minimize muzzle movement when shooting rapid strings of fire from an offhand position. Do not attempt to tune your compensator from a bench or from a supported position. Do not adjust or replace the compensator jets without first checking to make sure that the firearm has been cleared of all ammunition.
To begin tuning, set up at close range of 25-50 yards from a paper target. Fire a rapid group of 3-5 rounds. If the group patterns in an upwards direction, increase the amount of gas being ported through the jets by replacing one or both with a larger orifice size. If the group strings down, decrease the gas being ported upwards be replacing one or both of the jets with a smaller orifice. Torque both jets to 8-10 in/lbs and fire the shot string again.
Repeat this process until your group stops stringing up or down and holds at the same level of elevation. Overall group size should improve markedly when rapidly shooting offhand with a properly tuned Nitrous installed.
Specifications
- Caliber: .30 caliber – .308 Winchester, .300 Blackout
- Threads: 5/8 X 24 TPI
- Material: Stainless Steel
- Finish: Black Nitride
