Midwest Industries Trijicon MRO Riser Mount

Rock-Solid, Low-Weight, Duty-Ready MRO Riser Mount

Midwest Industries brings their expertise to the table with this low-profile riser mount for the Trijicon MRO.  Featuring two large cross-bolts that thread into stainless steel helicoils, this mount can be used with both the MRO, and the AT3 RCO Red Dot Sight.  This assembly comes in just under 2 ounces in both varieties available.

Choose from a Lower 1/3 Cowitness for a higher profile, or Absolute Cowitness for a more familiar AR-15 sight height.  If you’re not sure what’s right for you, check out our article !

Installation

Remove bolts from MI optic mount and install desired red dot with compatible Trijicon MRO Interface. Torque optic screws to manufacturer recommended specification. Slide MI optic mount onto upper receiver and torque optic mount cross bolts to 40 inch lbs.

Features

• Compatible with Trijicon MRO red dots and AT3 RCO red dots
• Lightweight, super strong, and snag free design
• Designed and tested to withstand real world use by military or law enforcement agencies.
• Steel cross bolts that engage stainless heli-coils for superior clamping force.
• All installation tools and hardware are included.
• 100% made in the USA with a MI lifetime warranty.

Specifications

• Mount Pattern: Trijicon MRO
• Material: 6061-T6 Aluminum
• Finish: Type 3 Hard Coat Anodizing
• Weight:
  • Absolute Co-witness: 1.4 oz.
  • Lower 1/3 Co-witness: 1.7 oz.

Products available on this page:

• Midwest Industries Trijicon MRO Riser Mount - Mount Height: Lower 1/3 Co-Witness  |  SKU: MI-MRO-1/3
• Midwest Industries Trijicon MRO Riser Mount - Mount Height: Absolute Co-Witness  |  SKU: MI-MRO-CO

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Midwest Industries Limited Lifetime Warranty

• Midwest Industries, Inc. stands behind every item we produce. If you are the original purchaser and a MI product fails due to manufacturing, assembly, or material defect, and you have not modified or abused the item, it will be repaired or replaced for life.
• Modification or alteration to these parts including custom coatings, voids all factory warranties.
• We are not responsible for items intentionally/accidentally damaged or destroyed, or products damaged by abuse/poor maintenance.
• This warranty is limited to the repair or replacement of the part or parts which are returned to Midwest Industries, Inc. and are determined by Midwest Industries, Inc. to be defective.
• This warranty, made to the original owner/purchaser, is not transferable.

The following items are excluded from this warranty:

1. Normal wear of product finishes and of all metal or plastic parts.
2. Damage or malfunction resulting from accident, negligence, misuse, or unauthorized repair or modification.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.