Ballistic Engineering Accurized PRO AR Match Grade Adjustable 2lb-5lb Single-Stage AR-15 Trigger

Name: Ballistic Engineering Accurized PRO AR Match Grade Adjustable 2lb-5lb Single-Stage AR-15 Trigger
SKU: TRAR-ACCU-PRO
Availability: InStock
Rating: 4.0 (2 reviews)

Based on 2 reviews

SKU: TRAR-ACCU-PRO | UPC: 198168716724

Orders will Ship within 1 Business Day

Lifetime Transferable Warranty

Only 2 remaining. Order now!

TOP ADD-ON'S

AT3™ AR-15 M-LOK Angled Foregrip - Black

$39.99

AT3™ ALPHA Micro Red Dot Sight with Shake Awake and Cantilever Riser Mount

$119.99

Accurized PRO AR Match Grade Trigger

Ballistic Engineering pushes the limits even further with the Accurized Pro trigger. This trigger is adjustable down to a mere two pounds of pull weight with an ultra crisp single stage. This fully adjustable trigger also has an even faster reset, for quicker follow-up shots that land accurately on target.

Engineered with NiB-X Nickel-Boron-coated hammer, WS2 Tungsten Disulfide dry lubricant-treated trigger, and A2+S7 tool steel internals, it promises unparalleled reliability and durability for superior rifle performance.

Product appearance may vary.

Key Features

2.0lbs-5.00lbs adjustable pullweight
1.75 degree trigger with one of the shortest breaks and resets available for your rifle
Ballistic Engineering`s patented disconnect system for superior reliability
NiB-X Nickel-Boron coated hammer and disconnect
WS2 Tungsten Disulfide dry lubricant treated trigger
A2 tool steel internals
17-4Ph stainless steel bushings
Clear anodized 6061 aluminum housing

Installation

The Accurized AR Match Grade Trigger has an additional step for installation. After the trigger and hammer pins are installed, you will note they may be loose, and slide through the cassette and lower receiver. Using the included allen wrench and holding the hammer and trigger pins in place, tighten the two set screws at the sides of the cassette until snug. This will ensure your trigger is secure, and has a precise fit in your lower receiver.

To adjust the pull weight, carefully release the hammer so you don’t damage your lower receiver. There is an additional set screw under the hammer, that can be tightened or loosened to achieve your preferred pull weight.

Specifications

Brand: Ballistic Engineering
Model: Accurized PRO AR Match Grade Adjustable Trigger
Adjustable Pull Weight: 2.5lbs – 5.00lbs
Trigger Angle: 1.75 degrees
Hammer Coating: NiB-X Nickel-Boron
Internal Components: A2 tool steel
Bushings: 17-4Ph stainless steel
Housing Material: Clear anodized 6061 aluminum

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

The company’s warranty and refund policy demonstrate a strong commitment to standing behind their products, expressing utmost confidence that the triggers will surpass customer expectations. In case customers are dissatisfied or reconsider their purchase, reaching out will prompt the company to provide a return label along with a complete refund.

Similarly, the warranty remains a lifetime, transferable assurance, aiming to address any rare instances where issues might arise. The company assures its dedication to customer satisfaction, ensuring that they’ll address and resolve any concerns promptly.

4 2 reviews