BCM MK2 Buffer Weight for MK2 AR-15 Receiver Extensions
6 Magazines Per Order: Due to extreme volume, we are limiting sales of magazines to 6 per customer order. This applies to individual and bundled magazines. AT3 reserves the right to cancel any order over the 6 magazine limit.
Frequently bought together
From orders that included this item
Product description
Bravo Company MK2 Buffer with 4 Sliding Weights
The Bravo Company MK2 Buffer weight for their specialized MK2 Receiver Extension is an upgrade over standard AR-15 buffers. Each buffer contains four sliding weights, along with an internal flat wire spring to ensure even reciprocation of mass. When combined with the MK2 Receiver Extension and an AR-15 Rifle length recoil spring, this buffer effectively reduces recoil.
You can also find MK2 Buffer kits here, with options for T0, T1, and T2 buffers included.
Note: MK2 Buffers are proprietary to MK2 Receiver extensions. Do NOT use MK2 Buffers in standard carbine buffer tubes!
What it does for you A standard buffer is a solid weight that slams back and forth every time the rifle cycles. The MK2 holds four sliding weights and an internal flat wire spring, so the mass moves more evenly. That means a smoother-feeling rifle, softer recoil and more consistent cycling.
Picking a weight: what the T-number means Each buffer has four internal weights. The T-number is how many of them are tungsten (heavy) instead of steel. A higher number means a heavier buffer, which slows the bolt more.
- T0, 3.8 oz (all steel): the lightest. For rifles that cycle normally and aren’t over-gassed.
- T1, 4.7 oz (1 tungsten): a small step up. A good place to start if your rifle feels a little harsh.
- T2, 5.6 oz (2 tungsten): the middle of the range. For noticeably over-gassed rifles or occasional suppressor use.
- T3, 6.5 oz (3 tungsten): heavy. For rifles that run hot, or regular suppressed shooting.
- T4, 7.4 oz (all tungsten): the heaviest. For heavily over-gassed or suppressed setups that need the most slowing down.
Not sure? Go one step heavier if your rifle feels harsh or throws brass far forward. Go one step lighter if it struggles to cycle with lighter ammo.
Before you buy, this is important
- It only fits BCM MK2 receiver extensions. It will NOT work in a standard carbine buffer tube.
- It runs with an AR-15 rifle-length recoil spring.
- Need the extension too? See the BCM MK2 Recoil Mitigation System kit.
Specs
- Weights: T0 3.8 oz / T1 4.7 oz / T2 5.6 oz / T3 6.5 oz / T4 7.4 oz
- Body: 7075-T6 aluminum, hardcoat anodized
- Internal spring: chrome silicon flat wire
- Bumper: polyether urethane
All 5 options on this page
- BCM MK2 Buffer Weight for MK2 AR-15 Receiver Extensions - Buffer Weight: T0 SKU BCM-BFMK2-M1-T0 · UPC 812526023056
- BCM MK2 Buffer Weight for MK2 AR-15 Receiver Extensions - Buffer Weight: T1 SKU BCM-BFMK2-M1-T1 · UPC 812526023063
- BCM MK2 Buffer Weight for MK2 AR-15 Receiver Extensions - Buffer Weight: T2 SKU BCM-BFMK2-M1-T2 · UPC 812526023070
- BCM MK2 Buffer Weight for MK2 AR-15 Receiver Extensions - Buffer Weight: T3 SKU BCM-BFMK2-M1-T3 · UPC 812526023087
- BCM MK2 Buffer Weight for MK2 AR-15 Receiver Extensions - Buffer Weight: T4 SKU BCM-BFMK2-M1-T4 · UPC 812526023094
Customer reviews 1
Verified buyerQuestions & Answers
No questions yet. Ask about fit, install or compatibility and our team answers within a business day.
Warranty & returns
90-day no-hassle returns
The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.
If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.
