Breek Arms Micro WARHAMMER Charging Handle for .308/AR-10

Click Here for Price
Out of Stock
Magpul MS4 Dual Multi Mission Quick Detach Sling - MAG518

Magpul MS4 Dual Multi Mission Quick Detach Sling - MAG518 - Coyote Brown


CMMG .308 GunBuilder Lower Receiver Parts Kit- No Grip or Fire Control Group

CMMG .308 GunBuilder Lower Receiver Parts Kit- No Grip or Fire Control Group


Sling Friendly AR-10 Charging Handle

The Warhammer Micro Charging Handle for AR-10 platforms brings ambidextrous function to your battle rifle, with low profile, short throw levers to prevent snags on slings and gear.  This is the big brother to the Warhammer Micro charging handle, coming in at a great price, with all the features and color selection of the AR-15 version.

The Breek Arms Warhammer Micro is just wider than a milspec charging handle.

Short Throw Handles and Gas-Busting Features

This bigger version of the Warhammer retains the deeply set-back levers, which are perfect for reaching around bulkier optics mounts close to your eye.  These ambidextrous levers have a smaller profile to akin to mil-spec handles, preventing interference with slings and pouches.  The handle also has a raised gasket, and a gas-diverting cut on the right side, ensuring that propellant gas doesn’t reach your eye.  Especially handy for suppressors, but will easily tame excess in just plain overgassed rifles.

Compatible With

Aero M5, DPMS Gen1 High and Low, Knights Armament SR25, STAG-10, Armalite AR10, Daniel Defense DD5 V3, V4, V5, and many others using DPMS Gen1 or Armalite AR10 platform.

Not Compatible With

IG716, Savage MSR10, Smith and Wesson M&P10, DPMS R-25 Gen II, Colt LE901, Bushmaster BAR-10, RRA LAR-8, HK MR762


  • Material: 7075-T6 aluminum
  • Finish: Type III hard-coat anodized
  • Perfect replacement for factory charging handles
  • Latches are also 7075-T6 aluminum
  • Compact ambidextrous release levers on both sides, 2.4″ total width across the handles
  • Set-Back Latches work great for large optics
  • Allows for one-handed manipulation
  • Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
  • Weighs in just over 1 ounce!
  • No gunsmithing required
  • Made in America

Have Questions About this Product?

Customer Reviews

Based on 1 review
Timothy Smith
Breek micro 308 charging handle

I have four of these and never had a problem. If you need a charging handle there's no need to look any further. Shipped extremely fast!

Thanks for sharing your feedback! We're glad you're satisfied with your purchase.