Geissele AR15 Reaction Rod – .223 / 5.56 NATO

Makes The Assembly Of Your Upper Receiver Much Easier & Simpler

The Geissele AR15 Reaction Rod – .223 / 5.56 NATO makes the removal and installation of barrels, flash hiders, gas blocks, and handguards much easier and simpler. It is designed to be gripped in a bench vise so that the rod is either horizontal or vertical.

The upper receiver is slid onto the rod and the rod’s integral splines enter the barrel extension and secure the barrel extension from turning. This allows all the torque from barrel nut wrenches to go directly into the barrel extension. In contrast, receiver vise blocks transmit the turning force into the aluminum receiver, a good part of which passes through the small, easily distorted receiver index pin.

Solid Bar Of 4140 Chrome Moly Steel

With the Geissele Reaction Rod, the marring of an upper receiver’s finish by gripping and twisting inside vise blocks is eliminated and so is the need to remove sights and mounts from the receiver’s M1913 rail.

This rod is cut from a solid bar of 4140 Chrome Moly steel, properly quenched/tempered, and ground to an exact diameter that is smooth and straight so the rod will enter an upper receiver without wobble.

NOTES: The Geissele Reaction Rod (5.56/.223) is compatible with the HK MR556 upper receiver.

Specifications:

• Type: Reaction Rod
• Material: Steel
• Type: AR-Style Rifles
• Caliber: 223 Remington / 5.56 NATO

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

Geissele Limited Lifetime Warranty

• Geissele Automatics warrants its firearms, components, and tools against defects in materials and workmanship during the lifetime of the product.
• Geissele Automatics does not warrant against normal wear and tear, items consumed or expended by their normal use (including springs, pins, etc.), product misuse (including criminal misuse, negligence or use under the influence of drugs or alcohol), accidental damage, or damage caused by improper handling, unapproved modifications to the product, defective or improper ammunition, or corrosion.
• Defective accessories (e.g., scopes, suppressors, flash hiders, sights, slings, parts with glass or electronic components, etc.) may be warranted by their original manufacturers but are not covered by this warranty.

If you submit a valid claim under this Limited Lifetime Warranty, Geissele Automatics will authorize your return of the product and, at its sole discretion, will:

1. Repair the product, including replacement of defective parts with new or refurbished parts
2. Replace the product with a product of equal or greater value.

If Geissele Automatics decides to replace a product under this warranty, Geissele will keep the product being replaced.

You must satisfy all terms and restrictions set forth in this Limited Lifetime Warranty and obtain a Return Material Authorization before shipping any product to Geissele Automatics.

Before shipping any product to Geissele Automatics, please ensure the following:

1. The product has not been modified, is clean and any accessories have been removed (unless otherwise instructed by a Geissele Automatics technical support agent)
2. There is no ammunition in any product or packaging
3. The completed Return Material Authorization form has been placed inside the packaging
4. The Return Material Authorization number has been clearly written on the outside of the packaging.

Any failure to follow these instructions could result in your package being refused and returned to you without repairs at your expense.

To obtain service, contact Geissele Automatics at sales@geissele.com or 610-272-2060.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.