Only 1 remaining. Order now!
Swampfox Ultimate Red Dot Mounting Screw Pack – Multi-Thread T10 Optic Hardware Kit
Features
- 14 four-screw sets covering common optic mounting thread pitches
- T10 Torx drive with small-diameter heads (5.0mm, #6-32 at 5.5mm)
- Designed for Swampfox Kingslayer, Liberty, Justice, Sentinel, and Ironsides Shield
- Covers factory slides, MOS plates, adapter plates, dovetail mounts, and Picatinny mounts
- Includes extended-length DIY screws (14.0mm EL) for custom fitment
Mounting pistol optics is rarely one-size-fits-all. The Swampfox Ultimate Red Dot Mounting Screw Pack provides a practical range of thread pitches and effective lengths to address real-world fitment issues across slides, plates, and mounts. Extra-long DIY sets are intentionally oversized so you can trim for a precise, custom fit when standard screws do not quite work.
NOTE: Though Swampfox calls out specific red dots, many of these screws are the most common for 90% of red dot optics out there. It’s just that fitment may be needed.
General Specifications
- Drive Type: T10 Torx
- Head Diameter: 5.0mm (all except #6-32 at 5.5mm)
- Maximum Torque: 15 in-lbs
- Threadlocker: Blue threadlocker recommended
- EL (Effective Length): Measured from end of threads to widest point under screw head
Fitment Guide
- Swampfox Optics
- Kingslayer / Liberty / Justice: M3.5 x 0.6, EL 11.0mm
- Sentinel-A / Sentinel-M: M4 x 0.7, EL 10.1mm
- Ironsides Shield: #6-32 x 0.39, EL 10.0mm
- Factory Slides and Plates
- Glock MOS / Canik TP9 / Others: M4 x 0.7, EL 14.0mm
- Brownells Glock and similar cuts: #6-32 x 0.374, EL 9.5mm
- Some Canik Elite SC: M4 x 0.7, EL 8.6mm
- Springfield Hellcat: M3 x 0.5, EL 12.0mm
- SIG P365XL: M3 x 0.5, EL 12.0mm
- Picatinny Mounts
- #4-40 x 0.250, EL 6.35mm
- DIY Extra-Long Sets for Custom Fitting (EL 14.0mm)
- #6-32 x 0.551
- #4-40 x 0.551
- #6-40 x 0.551
- M3 x 0.5
- M3.5 x 0.6
- M4 x 0.7
What’s Included
- 14x Four-screw mounting sets in assorted thread pitches and lengths
