1 more pictures
A Durable & Lightweight Handguard Ergonomically Designed For Left & Right Hand Shooters
The UTG Pro Arwen M-LOK Free Float Handguard features an ergonomic octagonal profile with thoroughly machined lightening cuts to reduce the weight and add more comfort to your AR build. It promotes a durable and lightweight design profile for easy manipulation of the rifle and works perfectly with either left or right-handed Mil-spec upper receivers.
It has anti-rotation tabs to prevent rotation and flex while accurately aligning it to the upper receiver and the patent-pending steel barrel nut requires no timing of the gas tube or its installation screws, making it quick and easy to install.
Precision Machined From 6061-T6 Aluminum
The UTG Pro Arwevn is precision machined from 6061-T6 aluminum with a matte black hard coat finish that ensures a long service life even under the most extreme use and abuse.
It’s available on 5″, 7″, 10″, 14″, 15″, 17″ lengths, and each size has an additional 4 MLOK slots at the front along the 45-degree tracks providing optimal functionality and versatility. It also boasts a full-length top Picatinny rail that runs flush with the upper receiver perfect for mounting sights, optics, and other accessories.
Barrel nut and barrel nut wrench are included.
Features:
- Proudly Designed and Made in the USA
- Precision Machined from 6061-T6 Aluminum and finished in a Matte Black Hard Coat Anodization
- Ergonomic Octagonal Profile with Thoroughly Machined Lightening Cuts
- Integral Anti-rotation Tabs Accurately Aligns Upper Receiver and Prevents Handguard Rotation and Flex
- Patented Steel Barrel Nut Requires no Timing of the Gas Tube or its Installation Screws
- Compatible with Left or Right Handed Mil-spec Upper Receivers
- Compatible with Standard Mil-spec. Forged AR15 Upper Receivers, Compatibility with Billet Upper Receivers is Not Guaranteed, Barrel Nut Fits Over Barrel Diameters up to 1.05″
Specifications:
- 6061-T6 aluminum construction
- M-LOK rail system
- 1.69 inches in width
- 2.07 inches in height
- 1.33-inch inner diameter
- .45-inch channel width
Lengths Available:
5 inch
- 6 M-LOK® Slots Across 3 Slot Tracks for Mounting Accessories with an Additional 4 Slots at the Front Along the 45 Degree Tracks
- 11 Slot Full-length Top Picatinny Rail Flush and Continuous with Upper Receiver
7 inch
- Features 9 M-LOK® Slots Across 3 Slot Tracks for Mounting Accessories with an Additional 4 Slots at the Front Along the 45 Degree Tracks
- 16 Slot Full-length Top Picatinny Rail Flush and Continuous with Upper Receiver
10 inch
- Features 15 M-LOK® Slots Across 3 Slot Tracks for Mounting Accessories with an Additional 4 Slots at the Front Along the 45 Degree Tracks
- 24 Slot Full-length Top Picatinny Rail Flush and Continuous with Upper Receiver
14 inch
- Features 21 M-LOK® Slots Across 3 Slot Tracks for Mounting Accessories with an Additional 4 Slots at the Front Along the 45 Degree Tracks
- 34 Slot Full-length Top Picatinny Rail Flush and Continuous with Upper Receiver
15 inch
- Features 24 M-LOK® Slots Across 3 Slot Tracks for Mounting Accessories with an Additional 4 Slots at the Front Along the 45 Degree Tracks
- 38 Slot Full-length Top Picatinny Rail Flush and Continuous with Upper Receiver
17 inch
- Features 30 M-LOK® Slots Across 3 Slot Tracks for Mounting Accessories with an Additional 4 Slots at the Front Along the 45 Degree Tracks
- 43 Slot Full-length Top Picatinny Rail Flush and Continuous with Upper Receiver
Have Questions About this Product?
The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.
If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.
UTG Lifetime Warranty
Leapers, Inc. warrants that all UTG & UTG PRO products conform to published specifications and are free from defects in material and workmanship. We will repair or replace defective products for the duration of the product’s life span. Our dedicated in-house customer service professionals will provide the best-in-class UTG experience.
Please note that this warranty does not extend to products disassembled, damaged from misuse, accidental impact, negligence, natural disasters/accidents, or unauthorized repair or alteration.
Warranty Instructions
- Go to Warranty Request under Customer Service on our website.
- Fill out the necessary contact and product information to the best of your knowledge.
- A purchase receipt is required for all warranty cases and needs to be attached at the end of the form.
- Finalize the case by submitting the information to us.
- You will hear from one of our customer service reps within 24-48 hours and we will provide you with additional information and instructions.
- No return will be accepted without an RA#.
- For any questions regarding the process, please feel free to call at (734)542-1500.
Disclaimer: Manufacturer’s warranty is subject to change without prior notice.
Customer Reviews
This was the easiest to install hand guard, especially without having to worry about indexing for a gas tube.The anti-rotation tabs aligned it perfectly.
Thank you for sharing your feedback! We're glad you are satisfied with your purchase!
I bought this to replace a 7” free float tube on a SBR 7.5” barrel. It looks great and can now accept a quick mount suppressor. Great company and fast shipping.
Thanks for sharing your feedback! We're glad you're satisfied with your purchase.
Guys, Loved the form fit and function. Good barrel nut lockup, solid mounting system.
Thanks for sharing your feedback! We're glad you're satisfied with your purchase.
Very well built and very light. I will be buying another one.I like no worries about the gas tube.
Thanks for the review. We're glad you like the handguard!
It's a nice rigid guard, definitely not going to get bent up easily. The anodizing is very solid as well. Unfortunately the mounting mechanism they decided to use in attaching the rail to the barrel nut uses 2 angled grub screws on the bottom. Without at least a third point to adjust on the top side the rail isnt able to utilize any stand off distance like the lower screws & preventing your barrel from sitting centered in the guard.
I tried everything to change the result. Lapped the intended receiver threads, changed out the barrel, changed out the receiver, lapped the second receiver threads. Ultimately the results were near identical regardless of components or assembly methods.
I could have gotten a faulty product by chance. Regardless, it was a very frustrating and time consuming process that consequently never got used. Used a different handguard and all was back to normal.