Need your order by Christmas? Click Here

UTG PRO Suppressor Ready SD Free-Float AR15 Handguard

Out of Stock
Orders will Ship within 1 Business Day
Backed by the UTG Lifetime Warranty!
TOP ADD-ON'S
AT3 M-LOK Rail Covers - 3-Pack - Retro - Black

AT3 M-LOK Rail Covers – Black Retro 3 Pack

$9.99
Dead Air Armament Keymount Flash Hider - .223/5.56 NATO - 1/2×28

Dead Air Armament Keymount AR 15 Flash Hider – .223/5.56 NATO – 1/2×28

$79.95
AT3™ M-LOK Rail Section - 5 or 7 Slots - Made in USA - 7 Colors Available

AT3™ M-LOK Rail Section – 5 Slot - Black

$14.99

UTG PRO Super Slim Suppressor Ready SD Free-Float AR15 Handguard

The UTG Super Slim SD Handguard is perfect for a sleek integral suppressed AR15 build. Able to accommodate suppressors up 1.67 inches wide, this handguard give you the ability to mount MLOK accessories farther forward in comparison to a regular free float handguard. Additionally this allows you to place a rail wrap or rail covers to mitigate heat from the suppressor.

Intuitive designing from UTG gives a full length top picatinny rail that sits flush the upper receiver, 7 sides of MLOK to attach accessories at any angle, and a smooth finish to making it comfortable to grip.

UTG PRO Suppressor Ready SD Free-Float AR15 Handguard

Included In the Box

  • SD Free-Float AR15 Handguard
  • MLOK Picatinny Rail Section
  • QD Sling Swivel Adaptor
  • Hardware for Installation
  • Barrel Nut
  • Barrel Nut Wrench

UTG PRO Suppressor Ready SD Free-Float AR15 Handguard

Installation

  • We recommend watching the installation video below to see if using a gunsmith or installing it yourself is the best choice for you.

Specifications

  • Brand: Leapers UTG
  • Color: Black
  • Fit: AR15
  • Model: Super Slim SD Free Float Handguard
  • Length: 7 inches, 10 inches, 14 inches, and 15 inches
  • Dimensions: 2.2″ H x 1.92″ Outside Width
  • Inside Width / Max Suppressor Width: 1.67 inches
  • Material: 6061-T6 Aluminum
  • Finish: Matte Black Hard Coat Anodized
  • Type: MLOK

Products available on this page:

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

UTG Lifetime Warranty

Leapers, Inc. warrants that all UTG & UTG PRO products conform to published specifications and are free from defects in material and workmanship. We will repair or replace defective products for the duration of the product’s life span. Our dedicated in-house customer service professionals will provide the best-in-class UTG experience.

Please note that this warranty does not extend to products disassembled, damaged from misuse, accidental impact, negligence, natural disasters/accidents, or unauthorized repair or alteration.

Warranty Instructions

  • Go to Warranty Request under Customer Service on our website.
  • Fill out the necessary contact and product information to the best of your knowledge.
  • A purchase receipt is required for all warranty cases and needs to be attached at the end of the form.
  • Finalize the case by submitting the information to us.
  • You will hear from one of our customer service reps within 24-48 hours and we will provide you with additional information and instructions.
  • No return will be accepted without an RA#.
  • For any questions regarding the process, please feel free to call at (734)542-1500.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Camo
Tucked away suppressor

Great product to tuck your suppressor away!

A
ASinNM
Great handguard!

For this for a suppressed PCC build. It took 15 minutes to install and looks great and functions perfectly! Would definitely recommend - even for novice builders.

Hi there! Thank you so much for leaving a review for the UTG PRO Suppressor Ready SD Free-Float AR15 Handguard. We are thrilled to hear that it was easy to install and looks great on your suppressed PCC build. Your recommendation means a lot to us, and we are glad to know it functions perfectly for you.

J
JP F.
Perfect Fit!

The inside diameter was perfect on for my omega 300 and my 7.5” 300BLK. Went with the 14” and the end cap sits 1/16” inside the guard. Gives it the ISR look I was trying to achieve!

Thank you for your positive feedback! We are glad to hear that our UTG PRO Suppressor Ready SD Free-Float AR15 Handguard was a perfect fit for your omega 300 and 7.5' 300BLK. We hope you continue to enjoy the ISR look it provides. Happy shooting!

R
Richard Smith
Suppressor ready

Easy to mount Suppressor Ready Handguard on AR pistol. Suppressor fits without problems.

Hi there, thank you for your review! We're glad to hear that you found our UTG PRO Suppressor Ready Handguard easy to mount on your AR pistol and that your suppressor fits without any issues. We strive to provide high-quality products that make the shooting experience smoother and more enjoyable.

S
Shane Huffstetler
Very well built

Perfect for a build with a silencer. You can get a longer rail and have your silencer inside the rail. Sick look!

Thanks for the review! We're glad you're happy with the product.

Questions & Answers

Don't see the answer
you're looking for?

Loading questions...