UTG® Super Slim Red Dot Mount for Rear Sight Dovetails – Glock, Sig, and M&P

Glock, Sig, and M&P Pistol Red Dot Mounts

Have a favorite pistol waiting for a red dot, but don’t have the fancy slide cuts for a direct mount?  No problem, thanks to these sets of rear dovetail adapters from UTG, compatible with Glock, Sig P320, and S&W M&P double stack pistols!  Featuring durable 6061-T6 aluminum construction, with an ultra-thin adapter plate to ensure the red dot stays as low on your slide as possible.  Just choose the right pattern for your pistol, perform a simple installation after drifting out your pistol’s rear sight, and you’ll be ready to rock.

These adapters use the common Fastfire 3 style mounting pattern for red dot sights.  Meaning, these dovetail adapters can be used with AT3’s ARO Red Dot Sight!  As well as UTG’s OP3 Red dots, Burris Fastfire 3, Vortex Venom, and Docter pattern red dot sights.

Specifications

• Material: Aluminum
• Weight: 0.53 oz
• Rail Type: Dovetail
• Length: 1.84 inch
• Width: 1.10 inch
• Height: 0.28 inch
• Includes: Adapter plate, dovetail adapter, Torx screws, Torx wrench

Compatibility

• Glock: All double-stack pistols Excluding G44
• Sig P320: All double-stack P-Series pistols
• M&P: All double-stack pistols

Products available on this page:

• UTG® Super Slim Red Dot Mount for Rear Sight Dovetails - Glock, Sig, and M&P - Dovetail Type: Glock  |  SKU: RDM-20GL
• UTG® Super Slim Red Dot Mount for Rear Sight Dovetails - Glock, Sig, and M&P - Dovetail Type: SIG  |  SKU: RDM-20SIG
• UTG® Super Slim Red Dot Mount for Rear Sight Dovetails - Glock, Sig, and M&P - Dovetail Type: M&P  |  SKU: RDM-20SW

The AT3 Tactical store has a 90 day no-hassle return policy for products in good condition. You can view the full details of our return policy here.

If you encounter an issue or defect with a product after 90 days of your purchase, you can refer to the manufacturer for a warranty claim. Their policies are below.

UTG Lifetime Warranty

Leapers, Inc. warrants that all UTG & UTG PRO products conform to published specifications and are free from defects in material and workmanship. We will repair or replace defective products for the duration of the product’s life span. Our dedicated in-house customer service professionals will provide the best-in-class UTG experience.

Please note that this warranty does not extend to products disassembled, damaged from misuse, accidental impact, negligence, natural disasters/accidents, or unauthorized repair or alteration.

Warranty Instructions

• Go to Warranty Request under Customer Service on our website.
• Fill out the necessary contact and product information to the best of your knowledge.
• A purchase receipt is required for all warranty cases and needs to be attached at the end of the form.
• Finalize the case by submitting the information to us.
• You will hear from one of our customer service reps within 24-48 hours and we will provide you with additional information and instructions.
• No return will be accepted without an RA#.
• For any questions regarding the process, please feel free to call at (734)542-1500.

Disclaimer: Manufacturer’s warranty is subject to change without prior notice.